Query returned 2346 results.
INSIDE A PSS DESIGN PROCESS: INSIGHTS THROUGH PROTOCOL ANALYSIS
Sakao, Tomohiko; Paulsson, Svante; Mizuyama, Hajime // 2011
Product/Service Systems (PSS) has been addressed as an interesting research target in the engineering design community. Yet, an understanding of PSS design processes is scarce. Motivated by this gap, ...
INTEGRAL DESIGNED DATABASE MORPHOLOGY FOR ACTIVE ROOFS
Zeiler, Wim // 2011
Lack of collaboration in design teams often results in a low mutual level of understanding about the design to produce. Especially the collaboration between designers and contractors is difficult ...
INTEGRATED SYSTEMS DESIGN EDUCATION
Conway, Alastair; Wren, Graham; Ion, William // 2011
Integrated Systems Design refers to the design, development and integration of products and systems. Central to successful ISD is the co-ordination and incorporation of contributions from many ...
INTEGRATION OF REMANUFACTURING ISSUES INTO THE DESIGN PROCESS
Hatcher, Gillian D; Ijomah, Winifred L; Windmill, James F C // 2011
Remanufacturing is the process of returning a used product to like-new condition with a warranty to match. The efficiency and effectiveness of this process greatly depends upon product design; there ...
INTEGRATION OF SUPPLIERS INTO THE PRODUCT DEVELOPMENT PROCESS USING THE EXAMPLE OF THE COMMERCIAL VEHICLE INDUSTRY
Stephan, Nicole Katharina; Schindler, Christian // 2011
During the last years the duties and responsibilities of engineering units in the vehicle industry changed drastically. Time pressure, cost pressure and the complexity of products are constantly ...
Interactive Technology Design at the Delft University of Technology - a Course about How to Design Interactive Products
Aprile, Walter Alberto; van der Helm, Aadjan // 2011
We present the Interactive Technology Design course as a possible model of interaction design education in design schools. Interactive Technology Design is a mandatory course for the master students ...
INTERDISCIPLINARY SYSTEMS MODELING USING THE CONTACT & CHANNEL-MODEL FOR SYSML
Albers, Albert; Christian, Zingel // 2011
Technical products are nowadays complex systems. Many specialized engineers develop highly mechatronic systems. Unfortunately, this still happens under insufficient conditions. Not only capable tools ...
INVESTIGATING ELEMENTARY DESIGN METHODS – USING AND EXTENDING THE GENOME-APPROACH
Zier, Sebastian; Kloberdanz, Hermann; Birkhofer, Herbert; Bohn, Andrea // 2011
Nowadays most of the design methods introduced in literature are not new but rather modifications or further developments of existing methods. Therefore the system of methods and method descriptions ...
IT-BASED CONFIGURATION AND DIMENSIONING OF CUSTOMER SPECIFIC PRODUCTS – TOWARDS A FRAMEWORK FOR IMPLEMENTING KNOWLEDGE BASED DESIGN ASSISTANT SYSTEMS
Gerhard, Detlef; Christoph, Lutz // 2011
Individual product solutions require practicable concepts and IT support for fast product configuration and design. Knowledge of possible design options and basic conditions is of great significance ...
Iteration Management by Identification of Value Stream in Product Development Processes
Elezi, F.; Pechuan, A.; Langer, S.; Herberg, A.; Behncke, F.; Lindemann, U. // 2011
This paper explores the possibilities of improving Product Development (PD) processes by reducing rework as it has been defined in lean thinking and by managing iterations based on how they ...
KNOWLEDGE CONFIGURATION MANAGEMENT FOR PRODUCT DESIGN AND NUMERICAL SIMULATION
Badin, Julien; Chamoret, Dominique; Gomes, Samuel; Monticolo, Davy // 2011
We focus on industrial design and simulation processes especially in automotive and aerospace areas. Designers use engineering models such as CAD (Computed Aided Design) and CAE (Computed Aided ...
Knowledge exchange between master and PhD students with regard to evolutionary product development
Eger, Arthur; Wendrich, Robert // 2011
Knowledge exchange between master and PhD students with regard to evolutionary product development
In this paper the exchange of knowledge between PhD- and master-students with regard to the ...
KNOWLEDGE MANAGEMENT CHALLENGES IN NEW BUSINESS DEVELOPMENT - TRANSITION OF THE ENERGY SYSTEM
Jensen, Ole Kjeldal; Ahmed-Kristensen, Saeema; Jensen, Nevena // 2011
The empirical study this paper is based upon, aimed to identify and describe knowledge management challenges, throughout the new business development process. This paper reports findings from the ...
Large and Scalable Workshop for Innovation and Entrepreneuship
Tollestrup, Christian // 2011
This paper describes several years of experience in planning and implementing an interdisciplinary Workshop for Innovation and Entrepreneurship (WOFIE) where design students develop new solutions and ...
LEAN APPROACH TO INTEGRATE COLLABORATIVE PRODUCT DEVELOPMENT PROCESSES AND DIGITAL ENGINEERING SYSTEMS
Vosgien, Thomas; Jankovic, Marija; Eynard, Benoit; Nguyen Van, Thomas; Bocquet, Jean-Claude // 2011
Lean philosophy has proven to have positive results concerning efficiency and reduction of overall process time. Product Development (PD) processes has an important role in the value definition and ...
LEARNING LEVELS IN TECHNICAL DRAWING EDUCATION: PROPOSAL FOR AN ASSESSMENT GRID BASED ON THE EUROPEAN QUALIFICATIONS FRAMEWORK (EQF)
Metraglia, Riccardo; Baronio, Gabriele; Villa, Valerio // 2011
For several years the European Commission for Education and Training has been trying to build a translation device to make comparable national qualifications, aiming to promote workers and ...
Leveraging Energy Efficiency Pathways for the Sustainable Design of Appliances, Buildings and ICT Products
Krishnan,S. S; Balasubramanian,N; Subrahmanian,E; Krishnamurthy,Ajay; Ramakrishnan,A. Murali; Venkatesh,V; Ramakrishna,G // 2011
Design is a complex activity and can be viewed as a solution to heterogeneous requirements from different stakeholders including customers, markets, regulators and manufacturers. Traditionally, the ...
LINKOGRAPHER: AN ANALYSIS TOOL TO STUDY DESIGN PROTOCOLS BASED ON FBS CODING SCHEME
Pourmohamadi, Morteza; Gero, John S // 2011
This paper presents LINKOgrapher, a software tool that carries out analyses on coded design protocols. LINKOgrapher is implemented building on an ontologically-based coding scheme utilising the ...
Local Co-education in Industrial Design and Product Development: a Real Case Simulation - Five Teams, Five Companies
Terroso, Miguel; Simoes, Ricardo // 2011
The present work aims at identifying how an effective project-based learning approach, focused on meeting real product development needs of local companies, can be implemented. The main issue is ...
Managing Complexity in Lean Construction Design – Using the MDM Methodology to Create Organizational Modularity
Krinner, M.; Elezi, F.; Tommelein, I.D.; Lindemann, U. // 2011
This research reports on the application in the Architecture-Engineering-Construction (AEC) industry of the Multiple-Domain Matrix (MDM) methodology, originally established for product development ...
MANIFESTATION OF UNCERTAINTY - A CLASSIFICATION
Kreye, Melanie E; Goh, Yee Mey; Newnes, Linda B // 2011
The aim of the research presented in this paper is to propose a classification of the manifestation of uncertainty to offer a basis for a shared understanding and characterization of the concept of ...
Methodology for the Creation of Value Chains Adapted to Technical and Radical Innovation
Petetin, François; Bertoluci, Gwenola ; Bocquet Jean-Claude // 2011
Innovation, however beneficial for a company, introduces risks proportional to the degree of disruption caused by the suggested innovation. Moreover, the new product development process Includes ...
MODELING AND DESIGN OF CONTACTS IN ELECTRICAL CONNECTORS
Albers, Albert; Martin, Paul; Lorentz, Benoit // 2011
The presented paper focuses on modeling and simulation of electrical connector contacts’ behavior and associated design. New solutions are developed, based on the Contact & Channel Approach validated ...
Modulare Produktstrukturen methodisch umsetzen - Entwicklung von Standardumfängen und Integration von Erfahrungswissen
Eilmus, Sandra; Beckmann, Gregor; Krause, Dieter // 2011
The integrated PKT-approach for developing modular product families aims at the methodical development of maximum external product variety using the lowest possible internal process and component ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.