Query returned 2346 results.
Examples of an Expert System in the Estimation of the Quality of Lubricants
Sprecic, Denijal; Sprecic, Elis; Vižintin, Jože; Sluga, Alojz // 2002
By applying expert systems and new systems of automation of the experimental researches based upon experimental methods, it is possible to come by quantitatively and qualitatively significant ...
Exemplary Applications of the Reverse-Engineering Method in the Process of Extending Service Lives of Aircraft in Operation in the Polish Air Forces
Barszcz, P.; Borgon, J.; Leski, A.; Niezgoda, T. // 2002
The paper has been intended to provide several examples to illustrate how the reverse-engineering method is applied to the process of extending service lives of aircraft in operation with the Polish ...
Expert Procedures Implementation in Software Catalogues
Baragetti, S.; Rovida, E. // 2002
The development of expert systems, implemented in software catalogues, was taken into consideration in this paper. The need of simplifying the choice process requires the assessment of simple rules ...
Forming a Base for a Manufacturing System Design and Evaluation Method
Karlsson, A. // 2002
In this paper, a base for a manufacturing system design and evaluation method is proposed. The main goal within the project is to create a method that addresses important aspects with manufacturing ...
From Business to Buttons
Balic, M.; Berndtsson, J.; Ottersten, I.; Aldman, M. // 2002
This paper describe a practitioner’s tool called Goal Cards. The aim is to bridge the gap between the expected business values when investing in the product and the actual design of the product. ...
Impact Damage Analysis of Layered Composite Plates
Smojver, I.; Soric, J. // 2002
Material and geometrical parameters affecting structural response of impacted aircraft structures have been defined. Numerical model for the prediction of damage in layered composite panels under low ...
Integrated Design in the Operating Room: Review and Analysis of Medical Product Development
Smith, S. L.; Mockford, R. A.; Young, R. A. // 2002
The multi-phase research programme ‘Integrated Design in the Operating Room’ aims to improve the integration and usability of operating room equipment. This paper focuses on a review and analysis of ...
Integrating Design Processes in an SE-Environment
Longmuß, J. // 2002
The principle of Simultaneous Engineering (SE) has generally reached its limits. Today the issue of process security is central in product development. Therefore enterprises will have to work out a ...
Interdisciplinary Methods and Tools for the Design of Mechatronic Products
Kleiner, S.; Anderl, R. // 2002
The mechanical engineering scene has increasingly incorporated electrics and electronics for the control of mechanical systems. With the growing importance of design automation and an increasing need ...
Introducing IT in Teaching the Engineering Design Graphics at the Faculty of Graphic Arts, University of Zagreb, Croatia
Bjelovučić Kopilović, S.; Jokić, T.; Kropar-Vančina, V. // 2002
Until 3 years ago, the only teaching aids in curriculum were blackboard, drafting triangles and compass. Assignments were made by technical fountain pen on tracing paper. Since, a lot of changes were ...
Learning and Practicing Basic Design Concepts. A Knowledge Model
Flores-Parra, I. M.; Guirado, R.; Bienvenido, J. F. // 2002
Teaching design techniques is an intensive knowledge based activity. There are three main different models involved: a matter model (their schemes are trespassed into the learning process), a model ...
Modelling the Relation Network in the Integrated Product and Design Process Model
Pavkovic, N.; Bojcetic, N.; Marjanovic, D. // 2002
The aim of this paper is to consider criteria for classifying the relations in engineering data structures. Some methods of modelling the network of relationships in the object-oriented environment ...
Modularity and Distributed Product Development
Hansen, P. K.; Gubi, E.; Hansen, B. G. // 2002
The paper describes the introduction of an architectural phase aiming at defining product modules at the Danish Company Bang & Olufsen. The result of the process has been a product with 10 ...
New Generation Computer-Aided Design Tools: Two Related Research Projects Investigating the Future Expectations of Designers
Sener, B.; Vergeest, J. S. M.; Akar, E. // 2002
The aim of this paper is to add to the debate through the findings of two discrete ongoing research projects, carried out in the Netherlands and in England, following these common aims: to explore ...
Numerical Simulation to Study the Influence of the Thickness of Canopy at a Bird Strike
Leski, A.; Baraniecki, R.; Malachowski, J. // 2002
The paper has been intended to present some considerations on how to determine the relationship between thickness of an aircraft canopy and stress tension during a collision with a bird. The finite ...
Optimization of Injection Law at Modern Diesel Fuel Supply Systems
Filipovic, I.; Pikula, B. // 2002
The most important element that contributes better atomization of air-fuel mixture, as well as better performing of combustion processes, is an introduction of direct injection of fuel under high ...
Optimum Design of a Formula One Rear Wing Using a Genetic Algorithm
Muzzupappa, M.; Pagnotta, L. // 2002
In the present paper, the possibility of optimizing the stiffness of a F1 lower-rear wing, in a shape which satisfies the aerodynamic requirements, by making use of a genetic algorithm was ...
Patterns of Design and Development in Adaptive Design: How Do We Match Design Method to Design Circumstance?
McMahon, C. A.; Draper, C. // 2002
Product Life Cycle: The Ultimate Aim in Product Development
Hundal, M. // 2002
Product Modelling in Early Phases of the Design Process
Korpela, T. // 2002
Product modelling help the designer to communicate about the design problem with his/her colleagues. Models help also the designer to understand entirely the problem to be solved. Aims of the ...
Radical Innovation and Design Research
Eloranta, K. T.; Riitahuhta, A.; Karvinen, M. // 2002
This paper contains a general description of our Radical Innovation Initiative for Tampere University of Technology (TUT) called Project RID. It is a programme for the development of innovation ...
Safe Steering Wheel Airbag Removal Using Active Disassembly
Jones, N.; Harrison, D.; Chiodo, J.; Billett, E. // 2002
Active Disassembly is a well researched technique for creating assemblies or casings that can break themselves apart for recycling using a thermal trigger. In order to remove potentially explosive ...
Selection of Dynamics Characteristics for Landing Gear with the Use of Numerical Model
Niezgoda, T.; Malachowski, J.; Kowalski, W. // 2002
Each type of aircraft needs a unique landing gear with a specific structural system, which can complete demands described by unique characteristics associated with each aircraft. During landing of ...
Short Term Workshop: An Alternative Strategy in Architectural Design Education
Kahvecioglu, H. L.; Erdem, A.; Paker-Kahveicoglu, N. // 2002
This paper aims to focus on potentials of short-term workshops within architectural curriculum. Key concepts for the study could be summarized as proposing the implementation of short-term workshop ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.